Vacuum Printing System VE6500

Features

• The printing system is applicable to substrates of large size.
• High productivity can be achieved with its special chamber construction.
• The system ensures achievement of void-less and flat encapsulation.
• Highly accurate printing can be realized by its image processing system.

Principle of Vacuum Printing Encapsulation (PAT.P)

Specification

Printing Piece	BGA, CSP, PWB, FPC, etc
Printing Area	Max. 510W × 610L [mm]
Mask Size	700 × 700-1000 × 1000 [mm]
Alignment Function	Automatic alignment performed by image processing system
Alignment Accuracy	+/- 50 µｍ
Cycle Time	50 sec./cycle (Excluding printing time)
Special Attachments	Off contact function
Dimensions	3875W × 3810L × 2470H [mm]
Weight	Approx. 8,000 [kg]
Utility Requirement
Power	Printer : 3-phase,　AC200V,　30 A
	Vacuum Pump : 3-phase,　AC200V,　60 A
Compressed Air	0.4 MPa, 50 NL/min.
Exhaust	2200 m3/hr
Cooling Water	0.1 MPa over, 0.3 m3/hr
N2	0.1 MPa over, 0-50 SLM

Outline of Composition

TOP > Semiconductors > Encapsulation