Multi Lab Coater
Test coater for laboratories capable of sample-coating suitable for the environment, using various kinds of materials and coating methods
Toray Engineering's Multi-Lab coater is a test-coater for laboratories capable of sample-coating with various kind of materials or methods in a laboratory. G2 small coater is available in Toray engineering's site for demonstration and capable of sample-coating.
G2 small coater is available in Toray engineering's site for demonstration and capable of sample-coating.
Multi-Lab coater can perform efficient coating with precious materials such as organic-EL (OLED) materials and PEDOT, a promising substitute of ITO currently deposited by the spattering process, used for forming transparent conductive film by coating.
Box-casing surrounding the coater (environment-keeping booth) can be filled with inert gas of nitrogen (N2), thus being capable of keeping N2-filled environment from coating to drying: best for coating in low dew-point (absolute dry-condition).Multi-Lab dryer is available for drying process, which is capable of vacuum (reduced pressure) heating drying, drying by dielectric heating with microwave, drying by IR-heating, and circulating hot-air drying (in N2 environment).
Specifications for Multi Lab Coater
|Display field||LCD, OLED, etc.|
|Electronic board field||Various interposers etc.|
|PV field||OPV etc.|
|Environment in system||Dew point||-65°C or less|
|Oxygen concentration||10 ppm or less|
|Option||Stripe coat nozzle||30 mm width (with Y-axis)|
|Ink-Jet head||Equipped with 1 set (with Y-axis)|
|Drying method||Vacuum, heating (250°C max.)|
|Equipped with camera for coating observation|
- CONTACT US
Shiga office: +81-77-544-1892
- Technological Field
- Technology >> Application & Coating > Application & Coating Technologies