High Sensitivity TOC Automatic Analyzer (for ultrapure water)
The TOC-780 is a high-sensitivity, automatic TOC analyzer which quickly and accurately measures the total organic carbon content of pure water, and water from rivers and other sources, in either online or offline mode.
This system is designed to achieve superior operability and save space, based on the previous TOC-700 Series which achieved high-speed response (90% response within five minutes) by employing a continuous measurement system developed using Toray Engineering’s proprietary technology.
- TOC absolute value can be measured using system blank and dilution water correction for calibration liquid.
- Auto zero and an automatic diagnosis function enable stable measurement over the long-term.
- The system employs the wet UV oxidation/CO2 detection system for continuous measurement and high-speed response.
- Applicable to a wide range of samples, from pure water to river water.
- Water quality management for pure water used in semiconductor manufacturing
- Water supply, drug manufacture, food, and chemical engineering water quality management
- Steam drain and other process management
- Other general pure water quality management
Principle of Measurement
After inorganic carbon is removed from sample water using an IC scrubber, organic carbon is oxidized and converted to carbon dioxide by adding an oxidant and irradiating with powerful UV rays in a UV reactor. Concentration of the converted carbon dioxide is measured with an infrared analyzer, and the TOC value is obtained from the calibration curve for carbon dioxide and TOC stored beforehand in the signal processing unit.
|Measurement range||TOC-780H ：
|Stream switching function||－|
|Measurement cycle||Automatic continuous measurement|
|Measurement method||Inorganic carbon removal: Automatic continuous acidic aeration method
Total carbon measurement: Automatic continuous low-temperature wet UV oxidation - infrared analysis method
|Calibration method||Span calibration: Manual
Zero calibration: Manual and automatic calibration
|Range setting||Manual setting, remote setting and automatic switching|
|Type||Standalone console, with casters|
|Standard liquid||Potassium hydrogen phthalate aqueous solution|
|Repeatability||Within ±2% of full scale|
|Zero stability||Within ±2% of full scale/day|
|Span stability||Within ±2% of full scale/day|
|Ambient temperature change||Within ±2% of full scale/5°C|
|Measurement value output||External output: DC 4-20 mA
Range ID signal no-voltage contact: AC 125 V, 2 A
|Error alarm indication||LED display, Closed contact output in case of error (AC 125 V, 2 A)|
|Alarms||Upper/Lower limits for measured value
Out of carrier gas (Option)
No sample (Option)
Out of reagent (Option)
|Sample conditions||Online measurement: 0.02–0.3 MPa, 30 ml/min or higher
Offline measurement: Normal pressure, 500–1000 ml/3 times
Phosphoric acid solution 20–25 l/month
Sodium persulfate solution 20–25 l/month *2
Nitrogen gas, Pressure 0.2–0.7 MPa
Consumption 60–78 Nm3/month
|Power||AC100V±10V 50/60Hz Approx. 500VA|
|Set up conditions||Indoor
0–40°C during operation (Temperature gradient 10°C/hour or less)
45–85%RH (No condensation)
Specifications are subject to change due to product improvements.
*1 Available as an option.
*2 Used only with TOC-780H.
- CONTACT US
Tokyo office: +81-3-3241-8461
Shiga office: +81-77-544-6224